Workplace and Environment

Site-specific risksWhen you arrive at an unfamiliar site, you'll often be faced with unexpected hazards that won't be covered on your generic site risk assessment. If left unmanaged, these could cause accidents leading to serious personal injuries.What... Read more

Drilling holes into textured coatingsTextured coatings are usually found as a type of decorative finish to walls and ceilings. Failure to take the proper precautions when drilling into them could lead to dust, which may contain asbestos, being inhale... Read more

Risk assessment - External areasIf you have external areas under your control, you will need to make sure that they're risk assessed. Our document will get you started.What's covered?We've identified some key considerations to take into account when ris... Read more

Cleaning in kitchensAlthough cleaning is traditionally a low-risk activity, in a kitchen environment there are a number of risks present that must be managed to prevent accidents. Cleaning safelyRisks left unmanaged could potentially put you on the w... Read more

Risk assessment - bar work Although pulling pints isn't the most dangerous activity in the world, there are risks associated with the work that should be identified and managed accordingly. Our risk assessment identifies what to look out for and what... Read more

Risk assessment - Hazard Analysis Critical Control Points (HACCP)If you serve food that's not fit for consumption, the results could be disastrous. Being suspected of food poisoning is hardly the best advertisement! However, doing so is easily avoidab... Read more

Changing electric light fittings Changing an electric light fitting must be done with care. There are several possible risks involved, including cuts from broken glass, burns from incorrect handling, plus the associated dangers of working at height a... Read more

Changing electric socket outletsChanging an electric socket outlet needn't be dangerous; in fact, if managed properly, the residual risks are minimal. However, failure to ensure that risks are reduced to an acceptable level may result in an accident, ... Read more

Changing electric lamps There are enough risks associated with the changing of electric lamps to make the task dangerous. Failure to ensure that these risks are reduced to an acceptable level may result in accidents, which could put you on the wrong ... Read more

Risk assessment - drinking water dispenserIf you have a water cooler that's fed with a large plastic container, then you'll need to make sure that the risks are assessed and controlled.The risksThe biggest risk associated with water cooler systems is t... Read more